Whirlpool WGD8300S Use and Care Manual - Page 15

Dryeruse

Get Whirlpool WGD8300S PDF manuals and user guides View all Whirlpool WGD8300S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

DRYERUSE Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from dryer. Do not dry anything that has ever had anything flammable on it (even after washing). Failure to follow these instructions can result in death, explosion, or fire. Follow these basic steps to start your dryer. Please refer to specific sections of this manual for more detailed information. 1. Clean lint screen before each load. See "Cleaning the Lint Screen." 2. Place laundry into dryer and shut door. 3. Press POWER. 4. Point the dial to an Auto or Manual Cycle. The preset settings for Auto or Manual Cycles will illuminate. The estimated (auto cycle) or actual (manual) cycle time (in minutes) will show in the display. NOTE: A preset time is displayed when an automatic cycle is selected. During the first few minutes of the drying process, the cycle time may automatically vary from the preset time based on the size and fabric type of the load. Toward the end of the drying process, the estimated time display will adjust again, showing the final drying time. Fire Hazard No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air Cycle. Failure to follow these instructions can result in death or fire. To use an Auto Cycle • Select an Auto Cycle. Auto cycles will default to the last dryness setting used for that cycle. • Select DRYNESS to adjust how dry you want the load. The time displayed is an estimated length of the cycle based on the Dryness selected. As the cycle runs, the control senses the dryness of the load and adjusts the time automatically for the selected dryness level. NOTE: Time is not adjustable for Automatic Cycles. Pressing the Timing Up or Down buttons will cause a triple beep, indicating that the time cannot be changed. To make changes to the Dryness and/or Options during an Auto Cycle: • Press PAUSE/CANCEL once. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
DRYERUSE
Explosion
Hazard
Keep
flammable
materials
and vapors,
such
as
gasoline,
away
from
dryer.
Do
not dry
anything
that
has
ever
had
anything
flammable
on it (even after washing).
Failure
to follow
these instructions
can result in
death,
explosion,
or fire.
Fire Hazard
No washer can completely
remove
oil.
Do not dry
anything
that has
ever
had
any
type of oil on
it (including
cooking
oils).
items containing
foam, rubber,
or plastic must
be dried
on
a
clothesline
or
by
using
an
Air Cycle.
Failure
to follow
these
instructions
can
result
in
death
or fire.
Follow these basic steps to start your dryer. Please refer to
specific
sections
of this manual for more detailed
information.
1.
Clean lint screen before each load. See "Cleaning
the Lint
Screen."
2.
Place laundry into dryer
and shut door.
3.
Press POWER.
4.
Point the dial to an Auto or Manual Cycle.
The
preset settings
for Auto or Manual Cycles will illuminate.
The estimated
(auto
cycle) or actual (manual) cycle time (in minutes) will show in
the display.
NOTE: A preset time
is displayed
when an automatic
cycle is
selected.
During the first few minutes
of the drying
process,
the cycle time
may automatically
vary from the preset time
based on the size and fabric type of the load. Toward the end
of the drying
process,
the estimated
time display
will adjust
again, showing
the final drying time.
To use an Auto Cycle
•
Select an Auto Cycle.
Auto cycles
will default to the last
dryness
setting
used for that cycle.
•
Select DRYNESS to adjust
how dry you want the load.
The time displayed
is an estimated
length of the cycle
based on the Dryness
selected.
As the cycle
runs, the
control
senses the dryness
of the load and adjusts the
time automatically
for the selected
dryness
level.
NOTE: Time is not adjustable
for Automatic
Cycles.
Pressing
the Timing
Up or Down buttons
will cause a triple beep,
indicating
that the time
cannot
be changed.
To make changes to the Dryness and/or
Options
during
an Auto Cycle:
•
Press PAUSE/CANCEL
once.
15