Whirlpool WGD8620HC Installation Instructions - Page 26
Remove rotating assembly, Reinstall hinge assembly on opposite side, Reposition rotating assembly,
View all Whirlpool WGD8620HC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
8. Reinstall hinge assembly on opposite side 10. R eposition rotating assembly and tubing Flip over the inner door to the left. Using a T20® screwdriver, reinstall the hinge assembly on the opposite side from which it was removed. DOORS WITH ELECTRICAL WIRING: 9. Remove rotating assembly Reposition rotating assembly and tubing 180° to opposite side of the door. 11. Rotate assembly bottom and fasten in place Press tubing into indents. Lift off inner door assembly. Using a Phillips screwdriver, remove the two screws securing the rotating assembly to the door. Rotate bottom of assembly 180° towards you and secure assembly with the two screws removed earlier, using a Phillips screwdriver. Press tubing into indents. IMPORTANT: Make sure to swing hinge down in front of rotating assembly (see Step 12). 26