Whirlpool WGD9750WW Owners Manual - Page 5

QUICK START GUIDE WARNING: To reduce the risk of fire electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. This Use and Care Guide covers several different models. Your dryer may not have all the cycles and features described. USING AUTOMATIC CYCLES Automatic Cycles automatically match the cycles setting to the type of load and adjust drying time for optimal performance. See the Cycles information on the following pages for more details on each cycle. 1. Clean lint screen. 2. Place laundry in the dryer. Shut the door. 3. Press POWER. 4. Select an AUTOMATIC Cycle. 5. Select the Options feature, if desired. 6. Press and hold START to begin. To make changes during an Automatic Cycle: 1. Press PAUSE/CANCEL. 2. Select DRYNESS LEVEL or Option. 3. Press and hold START to begin. NOTE: For the Sanitize Cycle, to ensure sanitization, do not interrupt the cycle. USING MANUAL CYCLES Use Manual Cycles to set a drying time and temperature. See the Cycles information on the following pages for detail on each cycle. 1. Clean lint screen. 2. Place laundry in the dryer. Shut the door. 3. Press POWER. 4. Select a Manual cycle. 5. Press the Dry Time up or down buttons until the desired drying time is displayed. 6. Press TEMPERATURE until the desired temperature glows. 7. Select the Options feature, if desired. 8. Press and hold START to begin. USING STEAM CYCLES Steam Cycles use water and heat to reduce wrinkles and odors in dry items. 1. Press POWER. 2. Select a Steam Cycle. For the Quick Refresh Cycle, select the desired Number of Garments. 3. Press and hold START to begin. Stopping Your Dryer To stop your dryer at any time Press PAUSE/CANCEL twice, open the door, or Press the POWER button. Pausing or Restarting To pause the dryer at any time Open the door or press PAUSE/CANCEL once. To restart the dryer Close the door and press and hold START button until dryer starts. 5