Whirlpool WGT4027EW Installation Guide - Page 20

Turn on water faucets to check for leaks. A small amount

Get Whirlpool WGT4027EW PDF manuals and user guides View all Whirlpool WGT4027EW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

5. Move washer/dryer to final location Outer Access Panel (27" model shown) Inner Access Panel (27" models only) 7. Secure drain hose Laundry Tub Standpipe Wall 44..545"."5" (1(11134mmmm) ) 4.5" ((111134 mmmm)) 44..55"" (1143 mm) If you are working in a closet or recessed area: move the washer/dryer into its final location and remove cardboard from under washer/dryer. Remove the outer access panel by removing 2 (24" models) or 3 (27" models) Phillips-head screws and one bumper (27" models only), located at the top of the access panel. Remove inner access panel (27" models only) by removing clip, cover, and 2 screws. Set panels, screws, clip, inner access panel cover, and bumper aside. Complete hookup of water hoses and vent. Replace access panels upon completion of washer/dryer installation. 6. Check for leaks Secure drain hose to laundry tub leg, drain standpipe, or inlet hoses for wall standpipe with shipping strap removed earlier (27" models) or plastic strap included in the parts package (24" models). Turn on water faucets to check for leaks. A small amount of water may enter washer. It will drain later. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
20
If you are working in a closet or recessed area: move the
washer/dryer into its final location and remove cardboard
from under washer/dryer. Remove the outer access panel
by removing 2 (24" models) or 3 (27" models) Phillips-head
screws and one bumper (27
"
models only), located at the top
of the access panel. Remove inner access panel (27" models
only) by removing clip, cover, and 2 screws. Set panels,
screws, clip, inner access panel cover, and bumper aside.
Complete hookup of water hoses and vent. Replace access
panels upon completion of washer/dryer installation.
5.
M
ove washer/dryer to final location
Outer Access Panel
(27" model shown)
Inner Access Panel
(27" models only)
Turn on water faucets to check for leaks. A small amount of
water may enter washer. It will drain later.
6.
Check for leaks
Secure drain hose to laundry tub leg, drain standpipe, or inlet
hoses for wall standpipe with shipping strap removed earlier
(27" models) or plastic strap included in the parts package
(24" models).
7.
Secure drain hose
(113 mm)
(113 mm)
Laundry Tub
Standpipe
Wall
4.5"
(114 mm)
4.5"
(114 mm)
4.5"
(114 mm)