Whirlpool WMH31017HB Installation Instructions - Page 6

8. Lower blower motor back into the microwave oven. A A. Exhaust Port 9. Using diagonal wire cutting pliers, gently snip out the rectangular damper vent covers at the perforations. Roof Venting Installation Only 1. Repeat Step 1 from "Wall Venting Installation Only." 2. Repeat Step 2 from "Wall Venting Installation Only." 3. Repeat Step 3 from "Wall Venting Installation Only." 4. Repeat Step 4 from "Wall Venting Installation Only." 5. Rotate blower motor so that exhaust ports face the top of microwave oven, and flat sides of blower motor face back of microwave oven. Lower blower motor back into microwave oven. A A B A. Diagonal wire cutting pliers B. Damper vent covers 10. Reattach blower motor to back of microwave oven with the 2 screws removed in Step 3. 11. Reattach damper plate. Make sure damper plate tabs are inserted into the slots in the top of the microwave oven. A B C D A. Damper plate B. Screws C. Damper plate tabs D. Slots 12. Secure damper plate with 2 screws removed in Step 1. A. Exhaust port IMPORTANT: If blower motor is not positioned with flat side facing the back of the microwave oven (as shown), performance will be poor. 6. Using diagonal wire cutting pliers, gently snip out the rectangular vent covers on the damper plate removed in Step 1 at the perforations. AB A. Diagonal wire cutting pliers B. Rectangular vent covers 7. Reattach blower motor to back of microwave oven with 2 screws removed in Step 3 of "Wall Venting Installation Only." Securely tighten screws. NOTE: If blower motor is not correctly oriented, the 2 screws removed in Step 3 cannot be reattached to the microwave oven. 8. Reattach damper plate. Make sure damper plate tabs are inserted into the slots in the top of the microwave oven. A B C D A. Damper plate B. Screws C. Damper plate tabs D. Slots 9. Secure damper plate with 2 screws removed in Step 1 of "Wall Venting Installation Only." 6