Whirlpool WMH76719CZ Installation Guide - Page 5
Roof Venting Installation Only
View all Whirlpool WMH76719CZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
6. Using diagonal wire cutting pliers, gently snip out the rectangular damper vent covers at the perforations. 5. Rotate blower motor so that exhaust ports face the top of microwave oven, and flat sides of blower motor face back of microwave oven. Lower blower motor back into microwave oven. A A B A. Diagonal wire cutting pliers B. Damper vent covers 7. Reattach blower motor to back of microwave oven with 2 screws removed in Step 3. 8. Reattach damper plate. Make sure damper plate tabs are inserted into the slots in the top of the microwave oven. A B C A. Exhaust port IMPORTANT: If blower motor is not positioned with flat sides facing the back of the microwave oven (as shown), performance will be poor. 6. Reattach blower motor to back of microwave oven with 2 screws removed in Step 3 of "Wall Venting Installation Only." Securely tighten screws. NOTE: If blower motor is not correctly oriented, the 2 screws removed in Step 3 cannot be reattached to the microwave oven. 7. Using diagonal wire cutting pliers, gently snip out the rectangular vent covers on the damper plate removed in Step 1, at the perforations. D A. Damper plate B. Screws C. Damper plate tabs D. Slots 9. Secure damper plate with 2 screws removed in Step 1. Roof Venting Installation Only 1. Repeat Step 1 from "Wall Venting Installation Only." 2. Repeat Step 2 from "Wall Venting Installation Only." 3. Repeat Step 3 from "Wall Venting Installation Only." 4. Repeat Step 4 from "Wall Venting Installation Only." AB A. Diagonal wire cutting pliers B. Rectangular vent covers 8. Reattach damper plate. Make sure damper plate tabs are inserted into the slots in the top of the microwave oven. A B C D A. Damper plate B. Screws C. Damper plate tabs D. Slots 9. Secure damper plate with 2 screws removed in Step 1 of "Wall Venting Installation Only." 5