Whirlpool WMT50011KS Dimension Guide - Page 5

DIMENSIONES OPENING/CLEARANCE DIMENSIONS 5 of 10 MODEL # SLIM TRIM KIT MODELS STANDARDTRIM KIT MODELS Unit of Measurement Width of cabinet opening (min.)* (A) Width of cutout (B) Height of cutout (C) Top of cutout to bottom of upper cabinet door (min.) (D) Bottom of cutout to top of lower cabinet door (min.) (E) Depth of cutout (min.) (F) YWMT50011K / YKMBT5011K in cm 30 76.2 281/2 72.4 12 30.5 2 5.1 19/16 4 213/4 55.2 YWMT55511K / YKMBT5511K in cm 30 76.2 281/2 72.4 171/8 43.5 2 5.1 19/16 4 213/4 55.2 Bottom of cutout to floor (min.) (G) 36 91.4 36 91.4 Back of the microwave oven to the surface of junction box (H) Recommended junction box location (e) Can this product be installed flush? Flush refers to the appliance not protruding past the cabinet depth. (Y/N) (J) 4" (10.2 cm) < H < 40" (102 cm) Upper right quadrant N A D B e C* E G H e F ELECTRICAL REQUIREMENTS 120 V, 60 Hz, AC only, 15 or 20 A fused, electrical supply is required. A time-delay fuse or dedicated circuit is recommended. Use a grounded 3 prong outlet. Do not use an extension cord. LOCATION REQUIREMENTS n This is a built-in appliance. Do not use as countertop microwave oven. n Minimum of 36" from the floor to cut-out floor. n Complete enclosure around the recessed portion of the microwave oven. n This microwave oven must be installed into a wood cabinetry. The location must provide: 1. Cutout opening that is plumb and square. 2. Cutout floor that is solid, level and flush with bottom of cabinet cutout. 3. Support for weight of at least 150 lbs (68 kg), which includes microwave oven and items placed inside. Power Supply Location FRONT VIEW SIDE VIEW BACK VIEW IMPORTANT: Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information. Refer to the Installation Guide before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation. All Whirlpool® appliances are appropriately UL, CUL or CSA approved.