Whirlpool WOD51EC0A Instruction Sheet - Page 1

Instruction Sheet for Air Baffle Kit Kit Contains: 2 Air Baffles 1 Instruction Sheet NOTE: This kit is to add the (2) air baffles around the fan on the lower oven. They are identical (will work for left or right side), and fit into existing screw holes. The harness bundle fits through a pie-shaped cutout relief on the air baffle. IMPORTANT: While the unit is apart; - Make sure nothing is blocking the exhaust or there are any problems with the blower(s) not moving enough air. Look for damage on the bottom panel of the oven (with bottom trim removed) to see if there is a dent, insulation, etc. blocking air movement. - Check the function of the upper and lower blowers to make sure they are both working properly. - Check to be sure the correct thermo-fuse and TOD are installed. WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Disconnect power to the ovens. 2. Remove ovens from installed position, remove upper rear sheet metal cover. 3. Install air baffles into existing screw holes. Make sure to install wire harness into pie-shaped cutout relief on baffle. See Figure 1. wire harness pie-shaped cutout relief Lower blower figure 1 4. Reinstall the upper rear sheet metal cover and reinstall the ovens. 5. Reconnect power to ovens and test. © Whirlpool Corporation 2014 (All Rights Reserved) Instruction Sheet W10719219 Rev A 6/14