Whirlpool WOD51EC7H Installation Instructions - Page 7

Replace Plastic Spacers

Page 7 highlights

1. Using 2 or more people, place the oven on its back on a covered surface. 5. In the same manner, install a front foot on the right front of the oven. 6. Using 2 or more people, place the oven in its upright position. 2. Install a foot on the left rear spacer using a #8-18 x 3/8" screw. NOTE: Position the foot so the long side of the foot is facing toward the top of the oven. A B C A. Spacer B. Foot C. #8-18 x 3/8" screw 3. In the same manner, install a foot on the right rear of the oven. 4. Install a front foot on the left front spacer using a #8‑18 x 3/8" screw. NOTE: Position the foot so the long side of the foot is facing toward the inside of the oven. A B C A. Front foot B. #8-18 x 3/8" screw C. Spacer 7. Go to the "Make Electrical Connection" section in the Installation Instructions provided with your built-in oven. Replace Plastic Spacers Replace Plastic Spacers on Single Ovens 1. Remove the screw attaching the plastic spacer (A) to the right side of the oven. 2. Using the screw removed, install a new plastic spacer (B) provided with this kit. A B A. Plastic spacer B. New plastic spacer 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

7
1.
Using 2 or more people, place the oven on its back on a
covered surface.
2.
Install a foot on the left rear spacer using a #8-18 x
3
/
8
"
screw.
NOTE:
Position the foot so the long side of the foot is
facing toward the top of the oven.
3.
In the same manner, install a foot on the right rear of
the oven.
4.
Install a front foot on the left front spacer using a
#8-18 x 
3
/
8
" screw.
NOTE:
Position the foot so the long side of the foot is
facing toward the inside of the oven.
5.
In the same manner, install a front foot on the right front of
the oven.
6.
Using 2 or more people, place the oven in its upright
position.
7.
Go to the “Make Electrical Connection” section in the
Installation Instructions provided with your built-in oven.
Replace Plastic Spacers
Replace Plastic Spacers on Single Ovens
1.
Remove the screw attaching the plastic spacer (A) to the
right side of the oven.
2.
Using the screw removed, install a new plastic spacer (B)
provided with this kit.
A
B
C
A. Spacer
B. Foot
C. #8-18 x
3
/
8
" screw
A
B
C
A. Front foot
B. #8-18 x
3
/
8
" screw
C. Spacer
A. Plastic spacer
B. New plastic spacer
A
B