Whirlpool WRF954CIHV Owners Manual - Page 19
RESET FILTER-Touch MAX COOL and MAX ICE
View all Whirlpool WRF954CIHV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3. Pull the filter out of the housing. 7. Twist the water filter and turn 90° clockwise until it locks into place and the arrows are aligned. 4. Remove the water filter cap from the water filter being replaced. 8. Push the water filter door closed. 5. Install the water filter cap onto the new filter. Be sure to align the arrows so the groves in filter align with ribs in filter cap. 6. Insert the filter into the housing. The Water Filter Status Lights The water filter status lights will help you know when to change your water filter. ■■ ORDER FILTER (yellow)-It is almost time to change the water filter. "Order Filter" display is on all of the time but off in Showroom mode and Sabbath mode. ■■ REPLACE FILTER (red)-Replace the water filter. While you are dispensing water, "Replace Filter" will blink 7 times and an alert tone will sound 3 times. NOTE: "REPLACE FILTER" will remain illuminated if the filter is not reset on the user interface (UI). ■■ RESET FILTER-Touch MAX COOL and MAX ICE for 3 seconds to reset water filter. The display will do a 3-second countdown, then flash the icon and play a tone. 19