Whirlpool WRT111SFDM Use & Care Guide - Page 4

Warning - ice maker

Get Whirlpool WRT111SFDM PDF manuals and user guides View all Whirlpool WRT111SFDM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

NOTE: The refrigerator cabinet should not touch the floor without a leveler installed. Location Requirements WARNING A B A. Remove runner. B. Install leveler. OR ■ Using the packaging corner posts (left-hand side, front and back) as a cushion, lay the refrigerator down on the floor (to your left-hand side only), as shown in the following graphic. NOTE: Using the packaging as a cushion will help avoid denting or scratching the refrigerator. ■ Using a ³⁄₈" hex driver, remove the two screws attaching each wooden runner to the bottom of the refrigerator. Install a leveler to each of the front corners. A B Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from refrigerator. Failure to do so can result in death, explosion, or fire. IMPORTANT: This refrigerator is designed for indoor, household use only. To ensure proper ventilation for your refrigerator, allow ¹⁄₂" (1.25 cm) of space on each side, and between the top of the refrigerator and overhead cabinets. Allow 2" (5 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave a 3¹⁄₈" (8 cm) minimum space on the hinge side to allow the door to swing open. NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator. C A. Remove runner. B. Install leveler. C. Packaging corner post Clean Before Using After you remove all of the package materials, clean the inside of your refrigerator before using it. See the cleaning instructions in "Refrigerator Care." Important information to know about glass shelves and covers: Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping. 4 ¹⁄₂" (1.25 cm) 3¹⁄₈" (8 cm)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
4
NOTE:
The refrigerator cabinet should not touch the floor
without a leveler installed.
OR
■
Using the packaging corner posts (left-hand side, front
and back) as a cushion, lay the refrigerator down on the
floor (to your left-hand side only), as shown in the
following graphic.
NOTE:
Using the packaging as a cushion will help avoid
denting or scratching the refrigerator.
■
Using a
³⁄₈
" hex driver, remove the two screws attaching
each wooden runner to the bottom of the refrigerator.
Install a leveler to each of the front corners.
Clean Before Using
After you remove all of the package materials, clean the inside of
your refrigerator before using it. See the cleaning instructions in
“Refrigerator Care.”
Location Requirements
IMPORTANT:
This refrigerator is designed for indoor, household
use only.
To ensure proper ventilation for your refrigerator, allow
¹⁄₂
"
(1.25 cm) of space on each side, and between the top of the
refrigerator and overhead cabinets. Allow 2" (5 cm) of space
behind the refrigerator. If your refrigerator has an ice maker, allow
extra space at the back for the water line connections. When
installing your refrigerator next to a fixed wall, leave a 3
¹⁄₈
" (8 cm)
minimum space on the hinge side to allow the door to swing
open.
NOTE:
This refrigerator is intended for use in a location where the
temperature ranges from a minimum of 55°F (13°C) to a maximum
of 110°F (43°C). The preferred room temperature range for
optimum performance, which reduces electricity usage and
provides superior cooling, is between 60°F (15°C) and 90°F
(32°C). It is recommended that you do not install the refrigerator
near a heat source, such as an oven or radiator.
A. Remove runner.
B. Install leveler.
A. Remove runner.
B. Install leveler.
C. Packaging corner post
B
A
B
A
C
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
¹⁄₂
" (1.25 cm)
3
¹⁄₈
" (8 cm)