Whirlpool WRT371SZBF Use & Care Guide - Page 8
Reverse Refrigerator Door
View all Whirlpool WRT371SZBF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
9. Remove the door stop from the bottom of the freezer door. 6. Pull the handle away from the door to release it from the shoulder screw. Keep all parts together. A AB A. Door stop screw B. Door stop 10. Move the door stop to the opposite side making sure that the hole in the door stop plate is aligned perfectly with the hole for the center hinge pin. 11. Using the screw removed in Step 9, fasten the door stop to the bottom of the freezer door. B C A A. Flat-head handle screws C. ¹⁄₄" Setscrew B. Refrigerator door handle 7. Remove the decal covering the hole on the opposite side of the door, where the refrigerator door handle will be installed, and discard the decal. A. Door stop screw 12. Tighten all screws. Set aside the freezer door until the hinges and refrigerator door are in place. Reverse Refrigerator Door 1. Remove the door stop from the bottom of the refrigerator door. AB A. Door stop screw B. Door stop 2. Replace the door stop on the opposite side of the refrigerator door, making sure that the hole in the door stop plate is aligned perfectly with the hole for the bottom hinge pin. 3. Fasten the door stop to the door. 4. Remove the screws from the top of the refrigerator door handle. 5. Remove the setscrew from the lower part of the handle. 8. Remove the shoulder screw from the left-hand side of the door and fasten it into the hole that was behind the decal. 9. Place the handle on the shoulder screw and push the handle toward the door until the mounting base is flush against the door. Tighten the setscrew. 10. Fasten the top of the refrigerator handle to the top of the refrigerator door. A A. Flat-head handle screws 8