Whirlpool WRV986FDEM Use & Care Guide - Page 19
Fast Ice, Filter Status, Fast Cool
View all Whirlpool WRV986FDEM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
When adjusting temperature set points, use the following chart as a guide: CONDITION: TEMPERATURE ADJUSTMENT: REFRIGERATOR too cold REFRIGERATOR Setting 1° higher REFRIGERATOR too warm REFRIGERATOR Setting 1° lower FREEZER too cold FREEZER Setting 1° higher FREEZER too warm / Too little ice FREEZER Setting 1° lower Cooling On/Off Your refrigerator and freezer will not cool when cooling is turned off. ■ To turn cooling off, press and hold the LOCK and MEASURED FILL buttons at the same time for 3 seconds. The Cooling Off icon will blink seven times and then remain lit as shown. IMPORTANT: ■ To avoid unintentionally locking the dispenser or changing other settings, press both buttons at exactly the same time. ■ When cooling is off, the dispenser paddles and all controls except Lock and Measured Fill are disabled. Press LOCK and MEASURED FILL at the same time. ■ Press and hold LOCK and MEASURED FILL for 3 seconds again to turn cooling back on. Options IMPORTANT: All options are OFF (default) until selected. ■ Press the OPTIONS button to open the Options menu and select among the Fast Ice, Filter Status and Fast Cool features. NOTE: "Fast Cool" and "Fast Ice" illuminate to indicate when both features are on. ■ Press the ICE/WATER button under "Back" at any time to return to the Home screen. Fast Ice The Fast Ice feature assists with temporary periods of heavy ice use by increasing ice production. Once selected, Fast Ice will remain on for 24 hours unless manually turned off. ■ To turn on the Fast Ice feature, press the OPTIONS button to access the Options menu, and then press TEMP, under Fast Ice to activate the feature. When the feature is on, the Fast Ice icon will appear on the dispenser display screen. ■ To manually turn off the Fast Ice feature, press the OPTIONS button to enter Options mode (unless you are already in Options mode), then press TEMP, under Fast Ice, again. When the feature has been turned off, the Fast Ice icon will disappear from the dispenser display. Filter Status Displays the percentage of use remaining in the water filter (from 100% remaining to 0% remaining). To access Filter Status, press the OPTIONS button to access the Options menu, then press OPTIONS, under Filter Status, to display the percent of life remaining in the water filter. ALSO The water filter status lights will let you know when to change your water filter. ■ ORDER FILTER (Yellow) - Order a replacement water filter. ■ REPLACE FILTER (Red) - Replace the water filter. Replacing the disposable water filter will automatically reset the water filter status tracking feature. See "Water Filtration System." NOTE: REPLACE FILTER will remain illuminated if a filter is not installed or installed incorrectly. Fast Cool The Fast Cool feature assists with periods of high refrigerator use, full grocery loads, or temporarily warm room temperatures. Once selected, Fast Cool will remain on for 24 hours unless manually turned off. NOTE: If you adjust the refrigerator temperature set point, Fast Cool will turn off. 19