Whirlpool WSZ57L18D Installation Instructions - Page 6
Warning
View all Whirlpool WSZ57L18D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Fasten the Top Trim to the Opening 1. Align the top grille assembly against the opening, so that it is tight and flush with the front surface of the wall opening or cabinetry. Place and Align Refrigerator and Freezer WARNING 2. From below and behind the top grille assembly, insert a panhead Phillips screw (J) through the predrilled center hole of the top grille (B) and into the wall opening or cabinetry. NOTE: Do not completely tighten the screw. Tip Over Hazard Refrigerator is top heavy and tips easily when not completely installed. Keep doors taped closed until refrigerator is completely installed. Use two or more people to move and install refrigerator. Failure to do so can result in death or serious injury. 3. Using a carpenter's level, level the top grille assembly (B), and shim as necessary. NOTE: Shims are not provided with the trim kit. 4. Using two pan-head Phillips screws (J), fasten the top grille assembly (B) by inserting a screw through the predrilled holes at each end. Completely tighten the screws. 5. Completely tighten the center screw. Fasten the Side Trim to the Opening 1. Using a carpenters level, make sure the sides are plumb and shim as necessary. NOTE: Shims are not provided with the trim kit. 2. Using four pan-head Phillips screws (J) (two on each side), fasten both the left-hand (E) and right-hand side trim pieces (G) to the opening or cabinetry. Make sure the trim pieces do not twist. When Moving Your Freezer or Refrigerator: Your freezer and refrigerator are heavy. When moving the appliance for cleaning or service, be sure to cover the floor with cardboard or hardboard to avoid floor damage. Always pull the appliance straight out when moving it. Do not wiggle or "walk" the appliance when trying to move it, as floor damage could occur. WARNING Excessive Weight Hazard Use two or more people to move and install refrigerator. Failure to do so can result in back or other injury. 1. Place the freezer and refrigerator in front of the opening (freezer on the left, refrigerator on the right). 2. Remove the plastic base grille from each appliance by removing the two Phillips screws. A A. Screw locations 6