Whirlpool WTW4715E Installation Instructions - Page 2
Location Requirements, Installation Requirements
View all Whirlpool WTW4715E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
INSTALLATION REQUIREMENTS Tools and Parts Gather required tools and parts before starting installation. Tools needed: Parts needed: (Not supplied with washer) Adjustable or open end wrench 9/16" (14 mm) 4" min (102 mm) Level Wood block Ruler or measuring tape Pliers that open to 13⁄4" (44.5 mm) Optional tools: Flashlight Bucket Parts supplied: NOTE: All parts supplied for installation are in cardboard insert in the top of the washer. Drain hose with clamp, U-form, and cable tie Inlet hoses with flat washers To order, please refer to toll-free phone numbers on back page of your Use and Care Guide. n 8212656RP n 8212641RP n 8212646RP n 8212545RP n 8212487RP n 8212638RP n 8212637RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack) 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack) 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack) 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM (2 pack) 5 ft. (1.5 m) Nylon braided inlet hose (2 pack) 6 ft. (1.8 m) Nylon braided inlet hose, space saving 90° elbow, hypro-blue steel couplings (2 pack) 6 ft. (1.8 m) Inlet hose, Black EPDM, space saving 90° elbow, hypro-blue steel couplings (2 pack) Alternate parts: (Not supplied with washer) Your installation may require additional parts. To order, please refer to toll-free numbers on back page of your Use and Care Guide. If you have: You will need: Overhead sewer Standard 20 gal. (76 L) 39" (990 mm) tall drain tub or utility sink, sump pump and connectors (available from local plumbing suppliers) 1" (25 mm) standpipe 2" (51 mm) diameter to 1" (25 mm) diameter Standpipe Adapter Part Number 3363920 Connector Kit Part Number 285835 Drain hose too short Extension Drain Hose Part Number 285863 Connector Kit Part Number 285835 Lint clogged drain Drain Protector Part Number 367031 Connector Kit Part Number 285835 LOCATION REQUIREMENTS Select proper location for your washer to improve performance and minimize noise and possible "washer walk". Install your washer in a basement, laundry room, closet, or recessed area. 271/2" 27" (699 mm) (686 mm) ((110069447232"m"mmm)) 2