Whirlpool WTW5000DW Use & Care Guide - Page 9

7. Select SOIL LEVEL 9. Select cycle options, if desired Once you select a cycle, select the soil level by turning the Soil Level knob to the desired setting. 8. Select WASH TEMP If you would like to add an extra rinse, fabric softener or extra soak period to any cycle, turn the knob to desired setting. 10. Press START/Pause to begin wash cycle Once you select a cycle, select the wash temperature by turning the Wash Temp knob to the desired setting. Always read and follow fabric care label instructions to avoid damage to your items. Wash Temp Hot Some cold water is added to save energy. This will be cooler than your hot water heater setting. Warm Some cold water will be added, so this will be cooler than what your previous washer provided. Suggested Fabrics Whites and pastels Durable items Heavy soils Bright colors Moderate to light soils Cool Warm water is added to assist in soil removal and to help dissolve detergents. Cold Warm water may be added to assist in soil removal and to help dissolve detergents. Colors that bleed or fade Light soils Dark colors that bleed or fade Light soils Tap Cold This is the temperature from your faucet. Dark colors that bleed or fade Light soils Press the START/Pause button to start the wash cycle. When the cycle has finished, the DONE indicator will light. Promptly remove items after cycle has completed to avoid odor, reduce wrinkling, and rusting of metal hooks, zippers, and snaps. Unlocking the lid to add items If you need to open the lid to add 1 or 2 missed items: Press START/Pause; the lid will unlock once the washer movement has stopped. This may take several minutes if the load was spinning at high speed. Then close lid and press START/Pause again to restart the cycle. If lid is left open for more than 10 minutes the water will pump out automatically. 9