Whirlpool WTW8800YC Use & Care Guide - Page 9

Using Laundry Product Dispensers, Starting Your Washer

Page 9 highlights

Using Laundry Product Dispensers 3. Add HE detergent to dispenser 5. Add fabric softener to dispenser Fabric softener dispenser Detergent dispenser Add a measured amount of HE detergent into detergent dispenser. IMPORTANT: Use only High Efficiency detergents. The package will be marked "HE" or "High Efficiency." Low-water washing creates excessive sudsing with a regular non-HE detergent. Using regular detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component failures and noticeable mold or mildew. HE detergents are made to produce the right amount of suds for the best performance. Follow the manufacturer's instructions to determine the amount of detergent to use. HELPFUL TIP: See "Washer Maintenance" for information on recommended method of cleaning washer dispensers. Pour a measured amount of liquid fabric softener into dispenser; always follow manufacturer's directions for correct amount of fabric softener based on your load size. Then select Fabric Softener option using the Dispensers button. IMPORTANT: Fabric Softener option must be selected to ensure proper distribution at correct time in cycle. Do not overfill or dilute. Overfilling dispenser will cause fabric softener to immediately dispense into washer. If Extra Rinse option is selected, fabric softener will be dispensed in the last rinse. NOTE: Do not use liquid fabric softener dispenser balls in this washer. They will not dispense correctly. 4. Add liquid chlorine bleach or Oxi product to dispenser Starting Your Washer 6. Press POWER to turn on washer Liquid chlorine bleach/ Oxi dispenser Add liquid chlorine bleach or Oxi laundry boost product to the dispenser. When using Oxi products or other laundry boosters (liquid or powdered color-safe bleach), select the Oxi option, press the Dispensers button until Oxi is selected. It is not necessary to select the Oxi option when using liquid chlorine bleach. • Do not overfill, dilute, or use more than 3/4 cup (180 mL) of liquid chlorine bleach. Overfilling will cause the bleach or Oxi product to dispense immediately into the washer. • Do not use color-safe bleach or Oxi products in the same cycle with liquid chlorine bleach. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

9
Add a measured amount of HE
detergent into detergent dispenser.
IMPORTANT:
Use only High Efficiency detergents. The package
will be marked “HE” or “High Efficiency.” Low-water washing
creates excessive sudsing with a regular non-HE detergent.
Using regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer’s instructions to determine the amount
of detergent to use.
HELPFUL TIP:
See “Washer Maintenance” for information on
recommended method of cleaning washer dispensers.
3.
Add HE detergent to dispenser
4.
Add liquid chlorine bleach or Oxi
product to dispenser
Add liquid chlorine bleach or Oxi
laundry boost product to the dispenser.
When using Oxi products or other
laundry boosters (liquid or powdered
color-safe bleach), select the Oxi option, press the Dispensers
button until Oxi is selected. It is not necessary to select the Oxi
option when using liquid chlorine bleach.
• Do not overfill, dilute, or use more than 3/4 cup (180 mL)
of liquid chlorine bleach. Overfilling will cause the bleach
or Oxi product to dispense immediately into the washer.
• Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
6.
Press POWER to turn on washer
Detergent dispenser
Liquid chlorine bleach/
Oxi dispenser
5.
Add fabric softener to dispenser
Pour a measured amount of liquid
fabric softener into dispenser; always
follow manufacturer’s directions for correct amount of
fabric softener based on your load size. Then select
Fabric Softener option using the Dispensers button.
IMPORTANT:
Fabric Softener option must be selected
to ensure proper distribution at correct time in cycle.
Do not overfill or dilute. Overfilling dispenser will cause
fabric softener to immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be
dispensed in the last rinse.
NOTE:
Do not use liquid fabric softener dispenser balls
in this washer. They will not dispense correctly.
Fabric softener dispenser
Using Laundry Product Dispensers
Starting Your Washer