Whirlpool WUI75X15H Dimension Guide - Page 3

DETAILED PLANNING DIMENSIONS 3 of 3 15" ICE MACHINES WUI75X15H/ WUI95X15H- D 24" x W 145⁄8" x H 3349⁄64" (depth without handle) OPENING/CLEARANCE DIMENSIONS A BC DF eG wH I E E FRONT VIEW Wall J Floor SIDE VIEW K P O N L M BACK VIEW MODEL # WUI75X15H, WUI95X15H in cm Width (min.) 15 38.1 A* Width without hinge side spacer option (min.) 15 38.1 Width with hinge side spacer option (min.) 153⁄4 40.0* B* Width of outlet location 6 15.0 C* Outlet location - distance from side 1 2.5 D* Width of water connection location 31⁄2 8.9 Minimum width from hinged side of ice machine to fixed wall - door open 90° 2 5.1 Minimum width from hinged side of ice E machine 131⁄4 33.7 to fixed wall - door fully open 180° Minimum width from hinged side of ice machine 67⁄8 17.4 to fixed wall - door fully open 118° F Height (min.) 34 86.4 G Height of outlet location 8 20.3 H Height of water connection location 9 22.9 I Outlet location - distance from bottom 12 30.5 J Depth of cabinet (min.) 24 61.0 K Water line location - distance from side 239/64 6.64 L Power supply - distance from side 349/64 9.57 M Drain hose - distance from side 75/16 18.57 N Power supply - distance from bottom 11/4 3.17 O Drain hose - distance from bottom 243/64 6.79 P Water line location - distance from bottom 147/32 36.12 e Recommended electrical connection location w Recommended water connection location * Install 3⁄4" (1.9 cm) front hinge-side spacer flush with face of adjacent cabinet and 3⁄4" (1.9 cm) back hinge-side spacer 6" (15.2 cm) from back wall. ELECTRICAL REQUIREMENTS 115 V, 60 Hz, AC only, 15 or 20 A fused, grounded circuit is required. A dedicated circuit is recommended. Use an outlet that cannot be turned off by a switch. Do not use an extension cord. WATER PRESSURE REQUIREMENTS A cold water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required to operate the ice maker. Call a licensed, qualified plumber with any questions about the water pressure. Reverse Osmosis Water Supply IMPORTANT: The use of a reverse osmosis system with this product is not recommended. However if you do use reverse osmosis, follow these instructions. IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the ice machine needs to be between 30 and 120 psi (207 and 827 kPa). If a reverse osmosis water filtration system is connected to the cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa). IMPORTANT: Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation. All Whirlpool® appliances are appropriately UL, CUL or CSA approved. W11349808A 19-Mar-2019 01:02:58 EDT | RELEASED ®/™ ©2019 Whirlpool. All rights reserved. 03/19 In some European factories the letter "W" of the part code mentioned herein will be automatically replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")