Whirlpool WUW35X15DS Use & Care Guide - Page 10

Stocking the Wine Cellar, Wine Racks

Page 10 highlights

Recommended Storing Locations (on some models) For best storing and serving temperatures for your bottle of wine, use the wine producer's recommended temperature setting. See the wine's label for details. It is recommended to store wine for short-term (few months) at 55°F (13°C). WINES COMPARTMENT White Wine Upper compartment Lighter Red Wine Lower compartment Red Wine Lower compartment Wine Racks Remove and Replace the Top and Middle Racks To Remove Racks: 1. Pull the rack forward until it stops. 2. Lift up on both sides of the rack to clear the shelf brackets from the bracket support pins. Stocking the Wine Cellar NOTE: For optimum wine storage, place white wines at the top of the wine cellar, light red wines in the center and red wines at the bottom. To Stock the Wine Cellar 1. Start stocking the wine cellar with the bottom display rack. 2. Starting on the left-hand side, place the first bottle in the rack on its side with the neck of the bottle facing the front of the wine cellar. 3. Pull the rack forward and out of the rack supports. Front of rack 3. Place the next bottle on its side with the neck of the bottle facing the back of the wine cellar. 4. Alternate in this manner until the display rack is full. 5. Push the rack all the way in before pulling the next one forward. 6. Pull the next rack forward and repeat steps 2 through 4; repeat for remaining racks. To Replace Racks: 1. Insert the rack into the compartment and slide it toward the rear of the wine cellar. 2. Align the bracket support pins with the holes in the shelf brackets, and then place the shelf into the rack supports until properly in place. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

10
10
10
10
10
10
10
10
10
10
10
10
To Replace Racks:
1.
Insert the rack into the compartment and slide it toward
the rear of the wine cellar.
2.
Align the bracket support pins with the holes in the shelf
brackets, and then place the shelf into the rack supports
until properly in place.
Stocking the Wine Cellar
NOTE:
For optimum wine storage, place white wines at the top of
the wine cellar, light red wines in the center and red wines at the
bottom.
To Stock the Wine Cellar
1.
Start stocking the wine cellar with the bottom display rack.
2.
Starting on the left-hand side, place the first bottle in the rack
on its side with the neck of the bottle facing the front of the
wine cellar.
3.
Place the next bottle on its side with the neck of the bottle
facing the back of the wine cellar.
4.
Alternate in this manner until the display rack is full.
5.
Push the rack all the way in before pulling the next one
forward.
6.
Pull the next rack forward and repeat steps 2 through 4;
repeat for remaining racks.
Recommended Storing Locations (on some models)
For best storing and serving temperatures for your bottle of wine,
use the wine producer's recommended temperature setting. See
the wine’s label for details. It is recommended to store wine for
short-term (few months) at 55°F (13°C).
Wine Racks
Remove and Replace the Top and Middle Racks
To Remove Racks:
1.
Pull the rack forward until it stops.
2.
Lift up on both sides of the rack to clear the shelf brackets
from the bracket support pins.
3.
Pull the rack forward and out of the rack supports.
WINES
COMPARTMENT
White Wine
Upper compartment
Lighter Red Wine
Lower compartment
Red Wine
Lower compartment
Front of rack