Whirlpool WUW35X24D Owners Manual - Page 6

Wine Cellar Doors

Page 6 highlights

Wine Cellar Doors Tool Needed: #2 Phillips screwdriver Remove Door and Hinges 1. Open the door to a 90° angle and remove the screws for the bottom door hinge. 2. Remove the door by pulling it forward and away from the wine cellar. 3. Remove the three screws from the top hinge and remove the hinge. 6. Insert the three decorative screws removed in Step 3 into the three holes in the upper right corner of the front of the wine cellar. 7. Remove the screws for the mechanical switch and door stop; remove the mechanical switch and door stop. Attach the mechanical switch and door stop to the reverse side of the door. Reverse Door Swing (optional) NOTE: There are two hinges for reverse door installation, one for a right-hand door swing and one for a left-hand door swing. Install the top hinge designed for the desired door swing. 1. Remove the two screws attaching the bottom hinge to door. C B A A. Bottom hinge pin B. Door stop C. Bottom hinge 2. Remove the door by lifting it up, and then pulling it away from the wine cellar. 3. Remove the three decorative screws from the upper left corner of the front of the wine cellar. 4. Remove the three screws from the right top hinge, and then remove the hinge. NOTE: The screws for the mechanical door switch are located behind the seal. Remove the seal first, and then remove the mechanical door switch screws. After reattach the mechanical door switch, place the seal in the original position. 8. Remove Whirlpool badge. (Only models: WUW55X15DS & WUW55X24DS) 9. Attach the bottom hinge to the reverse side of the door, and then flip the door 180º so that the hinge is now on the bottom of the door. 10. Insert the top corner of the door into the top hinge pin and reinstall the door on the wine cellar. 11. Press the door and the bottom hinge pin onto the bottom hinge. 5. Using the three screws removed in the previous step, attach the left top hinge to the upper left corner on the front of the wine cellar. NOTE: The left hinge is included in the bag with the "Use and Care Guide." 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

6
Wine Cellar Doors
Tool Needed:
#2 Phillips screwdriver
Remove Door and Hinges
1.
Open the door to a 90° angle and remove the screws for
the bottom door hinge.
2.
Remove the door by pulling it forward and away from the
wine cellar.
3.
Remove the three screws from the top hinge and remove
the hinge.
Reverse Door Swing (optional)
NOTE:
There are two hinges for reverse door installation, one for
a right-hand door swing and one for a left-hand door swing.
Install the top hinge designed for the desired door swing.
1.
Remove the two screws attaching the bottom hinge to door.
2.
Remove the door by lifting it up, and then pulling it away from
the wine cellar.
3.
Remove the three decorative screws from the upper left
corner of the front of the wine cellar.
4.
Remove the three screws from the right top hinge, and then
remove the hinge.
5.
Using the three screws removed in the previous step, attach
the left top hinge to the upper left corner on the front of the
wine cellar.
A
B
C
A. Bottom hinge pin
B. Door stop
C. Bottom hinge
NOTE:
The left hinge is included in the bag with the “Use and
Care Guide.”
6.
Insert the three decorative screws removed in Step 3 into the
three holes in the upper right corner of the front of the wine
cellar.
7.
Remove the screws for the mechanical switch and door stop;
remove the mechanical switch and door stop. Attach the
mechanical switch and door stop to the reverse side of the
door.
NOTE:
The screws for the mechanical door switch are
located behind the seal. Remove the seal first, and then
remove the mechanical door switch screws. After reattach
the mechanical door switch, place the seal in the original
position.
9.
Attach the bottom hinge to the reverse side of the door, and
then flip the door 180º so that the hinge is now on the bottom
of the door.
10.
Insert the top corner of the door into the top hinge pin and
reinstall the door on the wine cellar.
8.
Remove Whirlpool badge. (Only models: WUW55X15DS
& WUW55X24DS)
11.
Press the door and the bottom hinge pin onto the bottom
hinge.