Whirlpool WVW51UC0F Owners Manual - Page 11
Range Hood Care
View all Whirlpool WVW51UC0F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
RANGE HOOD CARE Cleaning IMPORTANT: Clean the hood and grease filters frequently according to the following instructions. Replace grease filters before operating hood. Exterior Surfaces To avoid damage to the exterior surface, do not use steel wool or soap-filled scouring pads. Always wipe dry to avoid water marks. Cleaning Method: Non-Vented (recirculating) Installation Filters The charcoal filter is not washable. It should last up to 6 months with normal use. Replace with Charcoal Filter Kit. See the "Assistance or Service" section to order. To replace charcoal filter: 1. Remove metal grease filter from range hood. See "Metal Grease Filter" in this section. 2. Bend spring clips away from metal grease filter. ■■ Liquid detergent soap and water or all-purpose cleanser ■■ Wipe with damp soft cloth or nonabrasive sponge, and then rinse with clean water and wipe dry. Metal Grease Filter 1. Remove the filter by pulling the spring release handle and then pulling down the filter. 3. Place charcoal filter into top side of metal filter. A 4. Bend spring clips back into place to secure the charcoal filter to the metal filter. A. Spring release handle 2. Wash metal filter as needed in dishwasher or hot detergent solution. 3. Reinstall the filter by making sure the spring release handles are toward the front. Insert aluminum filter into upper track. 4. Push in spring release handle. 5. Push up on metal filter and release handle to latch into place. 5. Replace metal grease filter. See "Metal Grease Filter" in this section. Replacing a LED Lamp The LED lights are replaceable by a service technician only. See the "Warranty" section for service contact information. 11