Whirlpool WVW57UC0F Owners Manual - Page 10
Range Hood Use
View all Whirlpool WVW57UC0F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2. Secure the bottom of the duct with (2) 4.2 x 8 mm screws. Complete Installation 1. For non-vented (recirculating) installations only, install charcoal filters over metal grease filter. See the "Range Hood Care" section. 2. Install metal filters. See the "Range Hood Care" section. 3. Check the operation of the range hood blower and light. See the "Range Hood Use" section. NOTE: To get the most efficient use from your new range hood, read the "Range Hood Use" section. RANGE HOOD USE The range hood is designed to remove smoke, cooking vapors, and odors from the cooktop area. For best results, start the hood before cooking, and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen. The hood controls are located on the front side of the canopy. Range Hood Controls A B C D A. On/Off light button B. Blower off and speed minimum button A C. Blower speed medium button D. Blower speed maximum button B C Operating the light The On/Off light button controls both lights. Press once for ON and again for OFF. D E FG A. Louver holes (non-vented/ recirculating installations) B. Duct covers C. LED lights D. Canopy E. Grease filters F. Grease filter handles G. Controls Operating the blower The Blower Speed buttons turn the blower ON and control the blower speed and sound level for quiet operation. The speed can be changed anytime during fan operation by pressing the desired Blower Speed button. Press the Blower Off button a second time to turn the blower OFF. 10