Xerox 2006NPC DocuColor 2006 Performing Setup from WebSetup - Page 9
Network Setup, Enable Ethernet, check box, Transmission Speed, Auto Detect
![]() |
UPC - 042215475440
View all Xerox 2006NPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
19. Performing the setup from WebSetup 1. Select the Network Setup button from the WebSetup screen to display the Network Setup tabs. 2. If it is not already displayed, select the Port tab and perform the following: a. Select the Enable Ethernet check box if the printer is to be connected to an Ethernet network. If this box is selected, the Transmission Speed option is enabled and the TCP/IP Ethernet options listed under the Protocol1 tab are enabled. Select a Transmission Speed from the drop down box. Select Auto Detect if your network environment is mixed, or select the speed (10 Mbps or 100 Mbps) of the network to which the printer is attached. Changing the speed requires rebooting the server. To deselect the option, ensure there is no check mark in the box. Xerox DocuColor 2006 19-9
![](/manual_guide/products/xerox-2006npc-docucolor-2006-performing-setup-websetup-bc39c47/9.png)