Xerox 470CX Xerox Document Centre 490/480/470/460 Reference Guide - Page 316
Changing the Finisher Staple Cartridge, Press the Finisher Pause Button to reactivate the Finisher.
UPC - 095205047035
View all Xerox 470CX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
Changing the Finisher Staple Cartridge NOTE Main Tray Finisher Pause Button The Document Centre Finisher has two staplers, each with a Staple Cartridge that holds 5000 staples. The system will display a fault screen when a cartridge needs to be replaced. Complete the following steps to clear the fault message: 5. Press the Finisher Pause Button and wait for the tray to lower. 6. Open the stapler access door (located above the Main Tray). 7. Remove the Staple Cartridge. Refer to the diagram on the inside of the stapler access door. 8. Insert the new Staple Cartridge and close the stapler access door. 9. Press the Finisher Pause Button to reactivate the Finisher. Contact Xerox if you have any problems removing or inserting the Staple Cartridge. Page 14 - 10 Xerox Document Centre Reference Guide