Xerox 5400DX Toner Guide - Page 11

Cartridge Defect Listing, Running Test S, Machine Error Codes

Page 11 highlights

XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 27. Install the spring onto the outside of the cartridge. 28. Replace the RF chip. CARTRIDGE DEFECT LISTING: We have found no strange defects related to these cartridges. The following is a list of repetitive defects for the more common failures: OPC drum PCR Magnetic roller 95 mm 45 mm 58 mm RUNNING TEST PAGES: 1. Press the MENU button (#1 or #5) until "PRINT MENU" is displayed. 2. Press the ITEM button (#2 or #6) until "TEST PRINT" is displayed. 3. Press the ENTER button (#4). 4. A series of test pages will then print out. MACHINE ERROR CODES: The error codes in these machines follow the trend of using all English messages (no number codes). There is no need to list them here. www.uninetimaging.com © 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11

27. Install the spring onto the outside of the cartridge.
28. Replace the RF chip.
CARTRIDGE DEFECT LISTING:
We have found no strange defects related to these cartridges.
The following is a list of repetitive defects for the more common failures:
OPC drum
95 mm
PCR
45 mm
Magnetic roller
58 mm
RUNNING TEST PAGES:
1. Press the MENU button (#1 or #5) until "PRINT MENU" is displayed.
2. Press the ITEM button (#2 or #6) until “TEST PRINT” is displayed.
3. Press the ENTER button (#4).
4. A series of test pages will then print out.
MACHINE ERROR CODES:
The error codes in these machines follow the trend of using all English messages (no number codes).
There is no need to list them here.
XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com