Xerox 6180N Getting Started v3.74 - Page 30
the DocuSP or Select Sample Current job
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
DOCUSP 3.74 4-4 Caveat Applicable printer product The system may display an unclearable Reset DocuTech/DocuPrint 75/90 message. The system prints normally. When Offset stacking is enabled, stitched jobs DocuTech 61xx do not offset. During a Print Now or Proof, a message to "Remove Sheets from the Top Tray" may be displayed when there is no need to remove sheets. Always clear the message before performing any other operation. DocuTech 61xx When a job is printing to the top tray and is interrupted by a print now or proof job, the interrupted job stops (as it should) and an error message reads, "remove sheets from top tray". Whether the sheets are removed or not, the message stays until "reset" is selected in the fault frame. DocuTech 61xx External finishing cannot be selected at the client using the IPP or HTTP gateways. Submit the job to the printer without any finishing, and select the external finisher at the DocuSP. DocuPrint 1xx EPS DocuTech 61xx The DocuSP software cannot read any LPS formatted floppy disk on the Sun Blade 2500 external USB floppy drive. Use a QIC tape or DOS formatted floppy to import LCDS resources to the system. A large job that requires partitioning on a system set for user intervention hangs when the user responds to the intervention message to print 1 copy. For multi-copy jobs, if an OTEXT command is specified on a copy pass for a page that doesn't print (no data on the page), then the OTEXT message will not be displayed and the WAIT parameter will be ignored. DocuPrint 1xx EPS DocuPrint 1xx EPS DocuPrint 1xx EPS The system is unable to resume printing when late binding attributes and page spacing options are used. As a work around, restart the DocuSP or Select Sample Current job from the Printer drop down menu to activate the resume and sample button on the repositioning output dialog box and the Resume button on the DocuSP main window. DocuPrint 1xx EPS The list of supported MIBs documented in the All Document Services Platform Common Controller System Guide are incorrect. Refer to the section on SNMP at the end of this chapter for more information. XEROX DOCUMENT SERVICES PLATFORM SERIES GETTING STARTED