Xerox 6360DN Advanced Features Guide - Page 63
Setting the Duration for the Tray 2-N Prompt, Address, Properties, General, Printer Defaults
UPC - 095205427660
View all Xerox 6360DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Printer Settings Setting the Duration for the Tray 2-N Prompt The Tray 2-N prompt setting specifies the amount of time the prompt displays on the control panel after paper is loaded in Trays 2-N. The Tray 2-N prompt requests the user to confirm the current tray setup or to specify the correct paper type for the print job. Setting Behavior None 30 seconds (Default) Infinite Turns the tray setup prompt off. Displays the tray setup prompt for 30 seconds after paper is loaded in Trays 2-N. Displays the tray setup prompt after paper is loaded in Trays 2-N until a selection is made on the control panel. To select a duration setting for Tray 2-N prompts, use one of the following options: ■ The printer's control panel ■ CentreWare IS Using the Control Panel To select the Tray 2-N prompt setting on the control panel: 1. Select Paper Tray Setup, and then press the OK button. 2. Select the Tray 2-N Prompt (the tray number depends on the number of trays in your printer), and then press the OK button. 3. Select the appropriate duration, and then press the OK button. Using CentreWare IS To select the Tray 2-N prompt setting using CentreWare IS: 1. Launch your web browser. 2. Enter the printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Click Properties. 4. Select General on the left navigation panel, and then select Printer Defaults. 5. Select the appropriate prompt setting in the Tray 2-N Prompt drop-down list. 6. Click the Save Changes button at the bottom of the page. Phaser® 6360 Color Laser Printer 4-13