Xerox 7400DXF Administration Guide - Page 22
Port 9100, LPR, TCP/IP Settings, TFTP Server Name, Boot File Name, DDNS/WINS Settings, BOOTP/DHCP
UPC - 095205006445
View all Xerox 7400DXF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Protocol Control 8. If you selected Off, follow the instructions in the TCP/IP Settings section to manually enter the printer's TCP/IP information. ■ Enter the TFTP server IP address or hostname in the TFTP Server Name field. ■ Enter the pathname of the configuration file in the Boot File Name field. 9. Under DDNS/WINS Settings, in the DDNS box, select one of the following: ■ On: The printer registers its IP name and address so other devices on the network can refer to it by name. ■ Off: The printer does not register its IP name and address. If DDNS is Off, these values may be set by BOOTP/DHCP if enabled. 10. If you selected On, follow the instructions in DDNS/WINS Settings to manually enter settings to identify the printer. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help. 11. Click the Save Changes button. 12. If prompted, enter your Admin or Key User name and password. Port 9100 To change Port 9100 settings: 1. Launch your web browser. 2. Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Click Properties. 4. Select the Protocols folder on the left sidebar. 5. Select Port 9100. 6. If prompted, enter your Admin or Key User name and password. 7. Select On or Off in the Port 9100 box. 8. If you selected On, follow the instructions on the page to select Port 9100 settings. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help. 9. Click the Save Changes button. 10. If prompted, enter your Admin or Key User name and password. LPR To change LPR settings: 1. Launch your web browser. 2. Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Click Properties. 4. Select the Protocols folder on the left sidebar. 5. Select LPR. 6. If prompted, enter your Admin or Key User name and password. 7. Select On or Off in the LPR box. System Administrator Guide 3-7