Xerox 7500/N Phaser 7500 User Guide - Page 110
Printer Is Making Unusual Noises, The Date and Time Are Incorrect, Duplex Problems, Front Door Will - toner
UPC - 095205705928
View all Xerox 7500/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Troubleshooting Printer Is Making Unusual Noises Probable Causes The printer is not level. The tray is not installed correctly. There is an obstruction or debris inside the printer. Solutions Place the printer on a flat, hard, level surface. Open and close the tray you are printing from. Turn off the printer and remove the obstruction or debris. If you cannot remove it, contact Technical Support. The Date and Time Are Incorrect Probable Causes Did you set the correct date and time? Solutions Ensure you have set the correct Date and Time on the control panel. Duplex Problems Probable Causes Media or settings are not correct. Solutions Make sure that you are using correct media. For more information see Supported Media on page 55. Do not duplex envelopes, labels, heavyweight stock, or transparencies. Front Door Will Not Close Probable Causes Solutions One or more of the consumables are missing or installed incorrectly. Check the toner cartridges, imaging units and waste cartridge for correct installation. The imaging unit door latch is not rotated all the way Make sure to the latch is rotated all the way to the to the right. right. 110 Phaser 7500 Color Printer User Guide