Xerox 790N 5790 / 5760 / 5765 Xerox One Step Image Transfer Paper - Page 1
Xerox 790N - Phaser Color Laser Printer Manual
UPC - 042215474368
View all Xerox 790N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
The Document Company XEROX Document # 100492 Xerox One Step Image Transfer Paper Instructions Majestik 5760/5765 Digital Color Copiers/Printers Regal 5790 Digital Color Copier/Printer DO NOT USE in 5775 or 4700 - Will cause immediate machine damage. Storage: • Optimum image quality is achieved with relative humidity less than 70%. High humidity levels can cause poor image quality due to dampness in the paper. For best results, return unused paper to original packaging with desiccant pack. Copying: • Use MSI By-Pass Tray • The imaging side (blank) is placed face up in tray • 8.5" x 11" Sheets feed Long Edge • 11" x 17" Sheets feed Short Edge • Fan sheets prior to loading • Recommended maximum tray quantity • 8.5" x 11" 30 sheets • 11" x 17" 20 sheets • Use Mirror Image Setting in Edit / Special mode so image will be right reading after transfer to fabric. • Set machine as you normally would for the type of original used i.e. Photo, Text • If poor fusing is experienced in 5760/5765 or 5790, use Heavy Weight Paper Mode. Heavy Weight Paper Mode is not selectable for 11 x 17" size in 5760/5765. • For adequate fusing when printing electronic images, insure total toner saturation is less than 280%. Pressing: Note: A swing-away heat press is required for acceptable image transfer. The clam-shell type presses are not recommended. A conventional home iron will not give satisfactory image transfer. • Set temperature to 350 - 375°F • Set to maximum workable pressure (approx. 40 lbs of pressure) IMPORTANT: To ensure even pressure, create a fabric cushion using 2 or 3 T-shirts on top of heat press bed. • Position and press fabric item for 2 - 3 seconds to remove wrinkles and moisture • Position transfer paper on fabric item and press for 8 -10 seconds (T-shirts). Heavy fabrics like Sweatshirts may require 25-30 sec. pressing time. • Peel off transfer paper immediately (peel while hot) Washing: • Turn garment inside out. Machine wash in warm or cold water. • Do not use fabric softener or bleach. • Tumble dry on low setting. Do not dry clean! • To brighten image on fabric after washing, press with an iron on medium setting. Fabrics: • Best performance is obtained on cotton, polyester, poly/cotton 50/50 blends and untreated canvas. Tight knits (heavy T-shirts) provide better results than open knits (sweat shirts). _____ Reordering: • Call Xerox Supply Net 1-800-822-2200 • 3R5811 for 8.5" x 11" (216mm x 279mm) 3R5812 for 11" x 17" (279 x 432mm)