Xerox C123 Quick Reference Guide - Page 85
Paper and Other Media, Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide
View all Xerox C123 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
7 Paper and Other Media NOTE: To avoid jams and misfeeds, do not load paper on top of any remaining paper in the tray. Remove the paper, and reload it on top of the new stock loaded. 2. If required, move the paper tray guides further out to load the new stock. To adjust the side and rear guides, pinch the guide lever on each guide and slide the guides to their new position. To secure the guides in position, release the levers. NOTE: When changing the size or type of stock in the tray, refer to Paper Tray Attributes in the Setups chapter on User Guide. For more information on reprogramming the tray, contact the Key Operator. 3. Load the paper neatly and tightly against the left-hand side of the tray. NOTE: Do not load paper above the maximum fill line. NOTE: When making single/double sided copies on perforated paper, load the paper so that the opposite side to the perforations feeds first. Feeding the perforated edge first may cause paper jams. 4. If the paper guides have been moved, slide the guides to just touch the edge of the paper. NOTE: When loading standard size paper, set the guides onto the notches on the tray to match the paper size. The machine recognizes 8K/16K paper as standard size even though paper trays have no notches for these sizes. 5. Close the paper tray. Paper can be loaded either short edge feed or long edge feed. Long edge feed (LEF) Short edge feed (SEF) 84 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 Quick Reference Guide