Xerox D105 User Guide - Page 18

8. Utilities 1) Device Info This function will show information regarding the flash device connected to the system. 2) System Info This function will show the system's hardware & software information. 3) Measure Speed This function will scan any inserted flash device(s) (ex. USB, SD, CF, etc) in any socket. The display will show the reported capacity and the Read/Write Speed of the selected device. 4) Verify Source This function will scan the original flash device for readability. 5) Rebuild Source This function will rebuild the original flash device in case of high Compare failure. 6) Load Default This function will reset all of the options back to the manufacture's default settings. Perform this function if the system is acting abnormal. Perform the "Shutdown" operation and restart the system in order for these changes to take effect. 7) Update Firmware This function will update the software for the system. To update: a. Copy the manufacture certified update file onto a USB Storage Device via a PC/Mac. b. Insert the USB Storage Device into the Source Port of the system. c. Go to this function and execute it by pressing the "ENT" button. d. Restart the system when asked to do so. It is strongly suggested that an upgrade to the system's firmware not be performed, unless the system is getting unstable and instructed to do so by a technician. 8) Save This function will save all the settings modified since the last time the system was booted-up. 15