Xerox M118i Network Connection Quick Setup Guide - Page 1
Xerox M118i - WorkCentre B/W Laser Manual
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Xerox WorkCentre® M118/M118i Network Connection Quick Setup Guide 701P42575 This guide includes instructions for: ■ Navigating Display Screens on page 2 ■ Network Setup Using DHCP on page 2 ■ Network Setup Using a Static IP Address on page 3 ■ Verifying Network Setup Using CentreWare Internet Services (CentreWare IS) on page 4 This setup guide provides instructions for connecting the Xerox WorkCentre M118/M118i on an Ethernet TCP/IP network. It includes procedures for setting up the network connection using either of the following methods: ■ DHCP: Use this method to allow a DHCP server to automatically assign an IP address. This is the factory default setting. ■ Static IP address: Use this method to manually assign an IP address provided by the network administrator. Note The System Administrator Guide provides detailed instructions for setting up a network connection. If you are using Novell IPX, refer to the System Administrator Guide for setup procedures. Before You Begin Before turning on the machine: ■ Confirm that an existing operational network utilizing TCP/IP is available. ■ Confirm that the Ethernet cable is plugged into the machine and is connected to an operational Ethernet port on the network. Note The RJ45 Ethernet cable is not supplied by Xerox. Copyright 2004 Xerox® Corporation. All rights reserved. 1