Xerox NC60 User Guide - Page 15

Operational Safety Operational Safety Your Xerox printer and supplies were designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards. Your attention to the following safety guidelines will help to ensure the continued safe operation of your printer. • Use the material and supplies specifically designed for your printer. The use of unsuitable materials may result in poor performance and possibly a hazardous situation. • Follow all warnings and instructions marked on, or supplied with, the printer, options and supplies. • Place the printer in a dust free area where the temperature range is 50° F to 90° F (10° C to 32° C) and the relative humidity is 15% to 85%. • Choose a location for the printer allowing sufficient space around the printer for operation and maintenance. The minimum recommended room size is 10 cubic meters/353 cubic ft. or approximately 8 ft. x 8 ft. x 8 ft. / 242 cm x 242 cm x 242 cm. • Place the printer in an area where there is adequate space for ventilation and servicing. The recommended minimal spacing for operations is 10 in. (25 cm) behind the printer, 10 in. (25 cm) on either side of the printer, and 24 in. (61 cm) in front of the printer. For Service, the suggested spacing is 4 ft. x 4 ft. (1.2m x 1.2m). Safety Notes y vii