Yamaha 16A NUAGE I/O 16D/16A/8A8D Operation Manual - Page 13

 [INPUT level meter] Indicates the input signal level of [ANALOG INPUT] (page 16) or [AES/EBU] (page 16) on the rear panel. Lamp Top (red) Second (orange) Third (orange) Bottom (green) Lighting level 0 dBFS -3 dBFS or more -14 dBFS or more -48 dBFS or more  [SAMPLE RATE indicator] Indicates the sample rate of the device. To select the sample rate of the device, use the NUAGE Workgroup Manager (page 19).  [CLOCK indicator] Indicates the word clock source of the device. To select the word clock source of the device, use the NUAGE Workgroup Manager (page 19). The [SYSTEM indicator] indicates the system status of the device on the Dante network. Lamp Status Description Left (green) Lit The device is working properly. Left (green) Flashes (every The firmware updating is in second) progress. Right (red) Lit The memory on the device does not work properly. Right (red) Flashes (every The CPU on the device does not second) work properly. The [SYNC indicator] indicates the synchronization status of the device on the Dante network. Description of the Device  [SRC indicator] Indicates the status of the SRC (sample rate converter), on (lit) or off (unlit). When you turn SRC on, even if the sample rate at which the device is operating differs from the sample rate of the audio signal input to the device, the SRC function automatically converts the rate of the signal so that playback will be correct. SRC is available on every two adjacent channels. To turn SRC on/off, use the NUAGE Workgroup Manager (page 19).  [OUTPUT level meter] Indicates the output signal level of [ANALOG OUTPUT] (page 16) or [AES/EBU] (page 16) on the rear panel. Lamp Top (red) Second (orange) Third (orange) Bottom (green) Lighting level 0 dBFS -3 dBFS or more -14 dBFS or more -48 dBFS or more  [Power switch] Turns the power on (I) and off (1). The lamp lights when the power is on, and is unlit when the power is off. NOTICE Rapidly turning the unit on and off in succession can cause it to malfunction. After turning the unit off, wait for at least 6 seconds before turning it on again. Lamp Status Description Left (green) Lit The device is working as the slave on the Dante network. Left (green) Flashes (every The device is working as the master second) on the Dante network. Right Lit (orange) Synchronization with the Dante network is in progress. Right (orange) Flashes (every The device is not synchronized with second) the Dante network. NUAGE I/O (16D) / NUAGE I/O (16A) / NUAGE I/O (8A8D) Operation Manual 13