Yamaha 270 Owner's Manual - Page 61
Connection to a USB storage device, Formatting USB storage media - 61
View all Yamaha 270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Connections Basic Operation Connection to a USB storage device This instrument has two USB [TO DEVICE] terminals; one on the left of the panel and one on the terminal at the front. USB [TO DEVICE] terminal A SELECT USB TO DEVICE Select the desired terminal TIP If you connect USB storage devices to both USB [TO DEVICE] terminals, the devices may not operate properly. USB [TO DEVICE] terminal B Both are the same terminal; however, both cannot be used at the same time. Use the [SELECT] switch to select the desired terminal. Switching to "A" selects the terminal on the left of the panel, while switching to "B" selects the terminal panel at the front. CAUTION While the instrument is accessing data (such as in the Save, Copy and Delete operations), do NOT use the [SELECT] switch. Doing so may corrupt the media or data. Formatting USB storage media When you execute a file-related operation with a connected USB storage device, a message may appear indicating the device/media is unformatted. If so, execute the Format operation (page 52). CAUTION The format operation overwrites any previously existing data. Proceed with caution. To protect your data (write-protect): To prevent important data from being inadvertently erased, apply the write-protect provided with each storage device or media. If you are saving data to the USB storage device, make sure to disable write-protect. To display the data in the USB storage device To view the data of the USB storage device on the CLP display, press the [SONG SELECT] button to engage song selection mode or press the [FILE/ SONG SETTING] button to engage file/song setting mode. If you try to engage these modes before connecting the USB storage device, press the [EXIT] button to exit the mode and re-engage the mode. TIP Though the instrument supports the USB 1.1 standard, you can connect and use a USB 2.0 storage device with the instrument. However, note that the transfer speed is that of USB 1.1. CLP-280/270 Owner's Manual 61