Yamaha 276S Add-On Effects AE011 COMP276/276S Owners Manual - Page 2

Installing Compressor 276/276S See the Add-On Effects Installation Guide for more information on installing Compressor 276/276S. Using Compressor 276/276S As with other effects, you can recall and edit the Compressor 276/276S program on the console or in Studio Manager. The basic operation is as follows: 1 Select one of the internal effects processors. 2 Patch the signal to and from the currently selected effects processor. 3 Locate the Effects Library page. 4 Select and recall Compressor 276 or 276S. n When you recall the program, all effects processor outputs will be muted temporarily. 5 Locate the Effects Edit page. 6 Set the parameters. (See the "Part Names and Functions" section for more information on Compressor 276/ 276S parameters.) The procedure for recalling and editing Compressor 276/276S varies depending on the console you are using. Refer to the Owner's Manual that came with your console for more information. Editing Parameters in Studio Manager In Studio Manager, editable parameters appear in both the Compressor 276/276S window and the Generic Editor window. The Compressor 276/276S window enables you to edit Compressor 276/276S specific parameters, and the Generic Editor window enables you to edit parameters common to Compressor 276/276S and other Effects. Refer to the Studio Manager Owner's Manual for your console for more information on the Generic Editor window. Studio Manager Generic Editor Window 2