Yamaha 325F Owner's Manual - Page 3
Connections To Your Amplifier, English
UPC - 027108923178
View all Yamaha 325F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
English CONNECTIONS TO YOUR AMPLIFIER Before making connections, make sure that the amplifier is switched off. ■ CONNECTIONS Loosen Black (-) - NS-325F Tighten Red (+) + NS-325F (R) (L) SPEAKERS Speakers output terminals of the amplifier R +- L A -+ B Amplifier or Receiver • Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the amplifier (or receiver) with the speaker cable. • Connect the (+) terminals on the amplifier (or receiver) and the speakers using one side of the cable. Connect the (-) terminals on both components using the other side of the cable. • Connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals, making sure not to reverse the polarity (+, -). If one speaker is connected with reversed polarity, the sound will be unnatural and lack bass. How to connect: 1 Loosen the knob. 2 Remove the insulation coating at the extremity of each speaker cable by twisting the coating off. 3 Insert the bare wire. 4 Tighten the knob and secure the cables. Test the firmness of the connection by pulling lightly on the cables at the terminal. Note: Do not let the bare speaker wires touch each other as this could damage the speaker or the amplifier, or both of them. When using a banana plug Banana plug 3 1 2 1 Remove the cover by pulling it toward you. 2 Tighten the terminal knob. 3 Simply insert the banana plug into the terminal. E-3