Yamaha 4 MG16/4 MG12/4 Owners Manual - Page 26
Rack Mounting, Mounting the MG16/4
View all Yamaha 4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Setting Up Rack Mounting I Mounting the MG16/4 (1) Two metal rack-mount supports are screwed onto the unit. Use a screwdriver to remove these supports. I Mounting the MG12/4 (1) Two metal rack-mount supports are screwed onto the unit. Use a screwdriver to remove these supports. (2) Turn the supports over, and fasten them into place again using the same screws. (2) Turn the supports over, and fasten them into place again using the same screws. (3) Mount the unit into the rack, and fasten it into place. NOTE If you wish you may move the left support to the right side and the right support to the left side, as shown in the drawing. (3) Mount the unit into the rack, and fasten it into place. Do not install the mixer near power amps or other heat-generating devices. Do not install the mixer near power amps or other heat-generating devices. 26 MG16/4, MG12/4