Yamaha 5100 Installation Manual: YSP-4100/5100 - Page 4

Firmware Update Procedure for YSP-4100/YSP-5100 POWER UP/DOWN LEFT/RIGHT ENTER STEP6 INITIALIZE THE YSP AND PERFORM AUTO SETUP Confirm that the power of YSP is off. Press and hold the [INPUT] button on the YSP and while holding that button, power on using the remote controller. "ADVANCED SETUP" will appear on the front display. Using the [UP] [DOWN] buttons on the remote controller, select "FACTORY PRESET" and press [ENTER]. Press [RIGHT] button on the remote controller and select "PRST: RESET". Power off by remote controller. Initializing completed. Your YSP is now ready for normal use. Perform AUTO SETUP and optimize the sound beam adjustments with the new firmware. (Refer to the AUTO SETUP (Intellibeam) section on the owners manual for details) Page.4 of 5