Yamaha 5400 XDA-AMP5400 Owner s Manual - Page 13

SPECIFICATIONS Specifications The specifications of the unit are as follows. Input jacks Analog Audio • Stereo Audio (RCA) x 4 Output jacks Analog Audio • Speaker Out x 4 (L/R) • Stereo Audio (RCA) x 4 Other jacks Trigger In x 4 Trigger Out x 4 Remote In x 1 Remote Out x 1 Audio Section Rated Output Power • (2-channel driven, 1 kHz, 0.9% THD, NORMAL, 4/8 Ω) 90/50 W • (2-channel driven, 1 kHz, 0.9% THD, BRIDGE, 8 Ω) 100 W • (1-channel driven, 1 kHz, 0.9% THD, NORMAL, 4/8 Ω) 100/50 W • (1-channel driven, 1 kHz, 0.9% THD, BRIDGE, 8 Ω) 200 W Dynamic Power • (2-channel driven, 20 Hz to 20 kHz, 0.08% THD, 20ms Burst, NORMAL, 4/8 Ω) 80/40 W • (2-channel driven, 20 Hz to 20 kHz, 0.08% THD, 20ms Burst, BRIDGE, 8 Ω) 150 W • (2-channel driven, 1 kHz, 0.9% THD, 20ms Burst, NORMAL, 4/8 Ω) 100/50 W • (2-channel driven, 1 kHz, 0.9% THD, 20ms Burst, BRIDGE, 8 Ω) 200 W • (All channel driven, 1 kHz, 0.9% THD, 20ms Burst, NORMAL(8-ch), 4/8 Ω) 80/50 W • (All channel driven, 1 kHz, 0.9% THD, 20ms Burst, BRIDGE(4-ch), 8 Ω) 170 W Maximum Effective Output Power (JEITA) • (1-channel driven, 1 kHz, 10% THD, NORMAL, 4/8 Ω) 130/65 W • (1-channel driven, 1 kHz, 10% THD, BRIDGE 8 Ω) 260 W Total Harmonic Distortion (THD) • (20 Hz to 20 kHz, SP OUT, 25 W, 8 Ω) 0.04% THD Frequency Response (+0/-3 dB) • SP OUT (AMP IN) 5 Hz to 40 kHz Signal to Noise Ratio (IHF-A) • SP OUT (AMP IN) 108 dB Maximum Input Signal • AMP IN (1 kHz, 0.9% THD) 1.0 V Gain • SP OUT (1 V INPUT) 25.8 dB Input Sensitivity • 1 W power (1 W/8 Ω output) • MAX power (50 W/8 Ω output) 150 mV 1.0 V General Power Supply • [U.S.A. model] • [Other models] AC 120 V, 60 Hz AC 220 to 240 V, 50/60 Hz Power Consumption 130 W • Amp1 - Amp4 On, No Signal Condition 32 W • Amp1 - Amp4 Off, Audio Sense On, Audio Sense Mode Active 14.8 W Standby Power Consumption • Audio Sense Off 0.3 W • Audio Sense On, Audio Sense Mode Standby 0.5 W Dimensions (W x H x D) 437 x 46 x 443 mm (17-1/4" x 1-3/4" x 17-3/8") Weight 6.0 kg (13.2 lbs) EN En 13