Yamaha 6250 HTR-6240/6250/6260 FIRMWARE UPDATE VERSION K032 USA Model - Page 4

Firmware Update Procedure for HTR-6240/6250/6260 IN CASE OF ERROR Case1 Display on the receiver "CDDA UPGRADER" doesn't change after playing the CD/DVD player.  Check digital cable wiring. Only optical or coaxial connection can be used for this update. HDMI connection will not work.  Check digital out setting. When using DVD players, make sure the digital out is set to "PCM". Once update is complete, reset DVD player to its original settings.  Check update disc. Make sure that your CD-R/RW is finalized and created as an "AUDIO CD". (playable on any CD/DVD player)  If all above are cleared, your CD/DVD player may not be suited for this update. Try another CD/DVD player or contact your local authorized service center to update the receiver for you. Case2 other unintended error occurred.  "ERROR" was displayed during the update  Receiver doesn't power up after the update. Solution: Try the following recovery method Step PL1. Unplug the AC power cable of the Yamaha receiver from wall outlet. Step PL2. On the front panel of the AV receiver, press and hold the [STRAIGHT] button and keep it pressed, which you plug the AC power cord of the Yamaha receiver to the wall outlet. Once the front panel displays "CDDA UPGRADER" release the [STRAIGHT] button. Step PL3. Go to Step 5 START FIRMWARE UPDATE. Page.4 of 4