Yamaha 6250 HTR-6260/6250/6240 FIRMWARE UPDATE VERSION J030 USA Model - Page 5
In Case Of Error, Step Pl1. - htr no power
 |
View all Yamaha 6250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Firmware Update Procedure for HTR-6260/6250/6240 IN CASE OF ERROR In case you have problems such as the example below, perform the update by the following recovery method. ƒ "ERROR" was displayed during the update ƒ Receiver doesn't power up after the update. Step PL1. Unplug the AC power cable of the Yamaha receiver from wall outlet. Step PL2. On the front panel of the Yamaha receiver, press and hold the [STRAIGHT] button and keep it pressed, which you plug the AC power cord of the Yamaha receiver to wall outlet. Once the front panel displays "CDDA UPGRADER" release the [STRAIGHT] button. Step PL3. Go to Step 5 of REPROGRAM FIRMARE. Page 5 of 5
-
1 -
2 -
3 -
4 -
5
 |
 |
Firmware Update Procedure for HTR-6260/6250/6240
________________________________________________________________________________
IN CASE OF ERROR
In case you have problems such as the example below, perform the update by the following recovery
method.
±
"ERROR" was displayed during the update
±
Receiver doesn't power up after the update.
Step PL1.
Unplug the AC power cable of the Yamaha receiver from wall outlet.
Step PL2.
On the front panel of the Yamaha receiver, press and hold the [STRAIGHT] button
and keep it pressed, which you plug the AC power cord of the Yamaha receiver to
wall outlet. Once the front panel displays "CDDA UPGRADER" release the [STRAIGHT] button.
Step PL3.
Go to Step 5 of REPROGRAM FIRMARE.
Page
5
of
5