Yamaha AD8HR AD8HR Owners Manual - Page 12
Appendix, General Specifications, I/O Characteristics
View all Yamaha AD8HR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Appendix Appendix General Specifications ■ Analog Input INPUT 1-8 XLR-3-31 AD converter Balanced 24-bit linear 128-times Oversampling ■ Digital Output DIGITAL OUT A, B D-Sub 25-pin Balanced ■ Connectors WORD CLOCK IN (75Ω Auto Terminated): BNC WORD CLOCK OUT: BNC HA REMOTE (PC-RS422): D-Sub 9-pin with PC-RS422 switch HA REMOTE (RS422): D-Sub 9-pin ■ Controls +48V Master Switch GAIN/DATA encoder ■ Keys [WORD CLOCK] [SELECT1]-[SELECT8] [+48V] [HPF] ■ LEDs WORD CLOCK [44.1kHz]/[48kHz]/[88.2kHz]/[96kHz] /[WORD CLOCK IN]/[DIGITAL OUT A] LEVEL METER 1-8 8x6 Segment SELECT 1-8 +48V 1-8, Selected Channel HPF 1-8, Selected Channel GAIN/DATA Display 7seg x3 ■ Functions HPF Frequency 20Hz-600Hz INPUT GAIN TRIM -1.5 dB to 1.5 dB (0.1 dB step) AES/EBU Higher Sampling Rate Data Output Format Double Speed / Double Channel Panel Lock Panel Brightness 7 steps ■ Miscellaneous Power Requirements U.S./Canada: 120 V 35 W, 60 Hz Others: 230 V 35 W, 50 Hz Dimensions (HxDxW) 45 x 383.5 x 480 mm Net Weight 5 kg Operation free-air temperature range 5 to 40 °C Storage temperature -20 to 60 °C Accessories AC Cable Rubber Feet x 4 Owner's Manual I/O Characteristics Analog Input Specifications Input Terminals GAIN Actual Load Impedance For Use With Nominal Input level Nominal Max. before clip INPUT 1-8 -62 dB +10 dB 3k Ω 50~600 Ω Mics & 600 Ω Lines -62 dBu (615 µV) +10 dBu (2.45 V) -42 dBu (6.15 mV) +30 dBu (24.5 V) *1. XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD) *2. In these specifications, when dBu represents a specific voltage, 0dBu is referenced to 0.775 Vrms. *3. AD converters are 24-bit linear, 128-times oversampling. Connector XLR-3-31 type (Balanced)*1 Digital I/O Specifications Input/Output Terminals Format Level Connector in Console Input 1/2 (word clock only)*1 Output 1-8 x 2 HA REMOTE x 2 WORD CLOCK IN WORD CLOCK OUT AES/EBU - - - RS422 RS422 TTL / 75Ω TTL / 75Ω D-SUB 25p Female D-SUB 9p Male BNC BNC *1. Input 1/2 on DIGITAL OUT A can be selected for word clock master. *2. Fs= 44.1, 48, 88.2 and 96 kHz is supported. *3. Double Channel mode is supported (Fs= 88.2, 96 kHz). *4. When locked to the word clock received via WORD CLOCK IN, the word clock will be output from WORD CLOCK OUT. 12