Yamaha AG-Stomp Owner's Manual - Page 27
Feedback Reduction Operating Mode, Set the Maximum Value of the EXP. Pedal
![]() |
View all Yamaha AG-Stomp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
G Set the Maximum Value of the EXP. Pedal Sets the maximum value that indicates the position of the EXP. Pedal. Press the [FR 1] button and use the [UP]/[DOWN] buttons to set the position (127-255). You can also hold the [FR 1] button and move the EXP. Pedal to set the position. * Due to the relationship between the maximum and minimum value, a value which results in a practical range of less than 128 can not be used. * The value can not be set greater than that of the EXP. Pedal's Switch Setting. Practical Effective Range Minimum Value Maximum Value Maximum Adjustable Range G Transmitting Control Change Numbers from the EXP. Pedal Sets the MIDI control change number that is to be transmitted when the EXP. pedal is used. Press the [FR 2] button and use the [UP]/[DOWN] buttons to set the control change number. • oFF : MIDI is not transmitted • 1-32, 64-95 : The control change number that is to be transmitted. I Feedback Reduction Operating Mode Press the [UTILITY] button and set the MIC TYPE Select Switch to TUBE 1. After "F.r" appears in the display, the current setting is displayed. Use the [UP]/[DOWN] buttons to set the Feedback Reduction Operating Mode. • GLb : Even if the patch is changed, the same Feedback Reduction parameters and settings will remain active (the same as the current condition). • PrG : When patches are changed, the Feed- back Reduction's parameters and settings will be changed to those that are stored with the patch's data. Utility Mode 27
![](/manual_guide/products/yamaha-agstomp-owners-manual-e87743f/27.png)