Yamaha AS1000 Owner's Manual - Page 11

AC IN, VOLTAGE SELECTOR, Asia and General models only, PHONO - type a

Page 11 highlights

45 1 6 7 8 MAIN IN PRE OUT SPEAKERS L CH A B VOLTAGE SELECTOR 230240V AC IN 6 AC IN Use this inlet to plug in the supplied power cable. 7 VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging the power cable into the AC wall outlet. Improper setting of the VOLTAGE SELECTOR may cause damage to this unit and create a potential fire hazard. Rotate the VOLTAGE SELECTOR clockwise or counterclockwise to the correct position using a straight slot screwdriver. Voltages are as follows: AC 110/120/220/230-240 V, 50/60 Hz 8 Foot If this unit is unstable, you can adjust the foot height by rotating it. 9 PHONO Selects the type of magnetic cartridge of the turntable connected to the PHONO jacks on the rear panel. • Set to the MM position when the connected turntable has a moving magnet (MM) cartridge. • Set to the MC position when the connected turntable has a moving coil (MC) cartridge. Note When you replace the cartridge, be sure to turn off this unit. 11 En English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

11
En
6
AC IN
Use this inlet to plug in the supplied power cable.
7
VOLTAGE SELECTOR
(Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
the power cable into the AC wall outlet. Improper setting
of the VOLTAGE SELECTOR may cause damage to this
unit and create a potential fire hazard.
Rotate the VOLTAGE SELECTOR clockwise or
counterclockwise to the correct position using a straight
slot screwdriver.
Voltages are as follows:
............................
AC 110/120/220/230–240 V, 50/60 Hz
8
Foot
If this unit is unstable, you can adjust the foot height by
rotating it.
9
PHONO
Selects the type of magnetic cartridge of the turntable
connected to the PHONO jacks on the rear panel.
Set to the MM position when the connected turntable has a
moving magnet (MM) cartridge.
Set to the MC position when the connected turntable has a
moving coil (MC) cartridge.
When you replace the cartridge, be sure to turn off this unit.
AC IN
SPEAKERS L CH
A
B
VOLTAGE SELECTOR
230-
240V
PRE OUT
MAIN IN
5
1
7
8
6
4
Note
English