Yamaha AS60-112T Owner's Manual - Page 5
Precautions, Nomenclature - silent
View all Yamaha AS60-112T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Precautions G Avoid using your amplifier in the following locations to prevent possible damage: • In direct sunlight or next to heating equipment. • Extremely cold or hot locations. • Locations exposed to high humidity or excessive dust. • Locations subject to strong shocks or vibration. G Before making any connections, make sure that the power on the amplifier and any external devices is switched OFF. G To protect the speaker from possible damage, always set the VOLUME knob to "0" before switching the power ON/OFF. G When connecting a speaker to this unit make sure to turn OFF the power first. G Do not apply excessive force to the switches and controls. G Your Yamaha powered speaker is a precision musical instrument. Handle it with care and avoid dropping or bumping it. G Operating temperatures will rise during use. Make sure the amplifier is used in a well-ventilated area. The AS60-112T should be placed in a position were there is at least 30cm (12") clearance from the wall on the sides, top and back of the amplifier. G For safety, always remove the power plug from the AC wall outlet if there is any danger of lightning striking in your area. G Keep the amplifier away from neon signs or fluorescent lighting to prevent noise pickup. G To prevent damage and possibly electrical shock, never open the case and tamper with the internal circuitry. G Never use benzene, thinner or other volatile liquids for cleaning, as these chemicals may cause damage or discoloration to the finish. Always use a dry, soft cloth to wipe off dust and dirt. Nomenclature I Control Panel q w e r q INPUT Jack (INPUT) This is the AS60-112T's INPUT jack. Connect the instrument or the output from an external device to this jack. When using the Silent Violin, Viola, or Cello, use a standard monaural plug cable to connect the LINE OUT jack on the instrument to this jack. * Before making any connections, make sure that the power switch is set to OFF. w Volume Control (VOLUME) Controls the volume of the speaker. e Equalizer Switch (EQ ON/OFF) This is the ON/OFF switch for the equalizer circuit (TREBLE, MIDDLE, BASS). Set to ON (>), the equalizer circuit is active and the three knobs r can be used to adjust their respective frequencies. Set the switch to OFF (?) if you want to produce only the direct sound created by the instrument or external device, with no additional alteration. t y r Equalizer Controls (TREBLE, MIDDLE, BASS) Controls the level of their respective frequencies. TREBLE (high frequencies), MIDDLE (middle frequencies), BASS (low frequencies). When set to "0", the tone will be flat, rotate the knob to the left (minus) to cut the frequency, and rotate to the right (plus) to boost the frequency. t Expansion Output Jack (LINE OUT) The signal received via the INPUT jack is transmitted from this jack although with its impedance converted (the signal also bypasses the equalizer circuit). When adding another powered speaker unit, such as another AS60-112T, connect the additional unit to this jack. y Power Switch & Lamp (POWER) This is the AS60-112T's power switch. When the switch is depressed, the lamp next to the switch will light. * To protect the speaker from damage, always make sure that the Volume Control w is set to "0" before the power is switched ON/OFF. 5