Yamaha ATS-2020 ATS-2020 Easy Setup Guide - Page 2

Connections 1. Connect the TV and sound bar with the optical cable (supplied). Remove the cap of the optical cable and check the direction of the plug. 2. Connect the power cable of the sound bar and subwoofer to AC wall outlets. Sound bar (rear) Watching TV 3. Turn on the TV and set the volume to minimum. For details, refer to the Owner's Manual. 1. Press to turn on the sound bar. The subwoofer turns on automatically simultaneously with 4. the sound bar. Disable the TV speakers using the TV's audio 2. Press the TV key to select TV as the input source. settings menu (if available). 3. Select the desired input source on the TV. HINT 4. Press the VOLUME (+/-) keys to adjust the If a setting to disable the speaker output is not available on your TV, you may disable it by connecting headphones to the volume. headphone jack on the TV. For details, refer to the instruction manual of the TV. Playback of a Bluetooth® device You can connect a Bluetooth device, such as a smartphone or digital music player, with the sound bar wirelessly. For details, refer to the Owner's Manual. Optical cable (supplied) Coaxial digital cable (commercially available) Subwoofer (rear) Connect to an AC wall outlet. Leave the unit powered off until all connections are complete. OPTICAL OUTPUT TV Connect to an AC wall outlet. Coaxial digital audio output (orange) Set top box or playback device (such as a Blu-ray DiscTM player) HINT If your playback device has a coaxial digital audio output, you can connect it to the BD/DVD input of the sound bar with a coaxial digital cable (commercially available). ... and more features! For details about the other useful features, refer to the Owner's Manual. - TV remote control learning function - TV Remote Repeater - Clear voice - UniVolume The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Blu-ray Disc is a trademark of the Blu-ray Disc Association.