Yamaha AV-S7 Owner's Manual - Page 8

PRECAUTIONS NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Loading the batteries for the remote control transmitter Proper use of the remote control transmitter 1 STANDBY INPUT 1 INPUT STANDBY/ON PROGRAM INPUT 2 VOLUME L C R REAR D E A B C 3 2 Within approximately Remote control sensor 6 m (19.7 feet) 1 Remove the battery compartment cover. (Slide the cover in the direction of the arrow.) 2 Insert 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or equivalent) into the battery compartment. * Installing the batteries improperly may cause failure. 3 Replace the battery compartment cover. Precautions for battery use • Insert the batteries according to the direction indicated in the battery compartment. • Replace all batteries with new ones at the same time. • Remove the batteries if they are weak or if the unit will not be used for a long period of time. • Do not mix normal batteries with rechargeable batteries. 30° 30° Aim the remote control transmitter at the remote control sensor (within a 60° range with no obstacles) and operate as shown. Notes concerning use • Replace the batteries if the control distance decreases or operation becomes unstable. • Periodically clean the transmitter window on the remote control transmitter and the sensor on the center speaker with a soft cloth. • Exposing the sensor on the center speaker to strong light (such as an inverter-type fluorescent lamp) may interfere with operation. In this case, reposition the center speaker to avoid direct light. • Keep the remote control transmitter away from moisture, excessive heat, shock and vibrations. • The remote control transmitter's range is from 0.2m (8") to 6m (20') from the sensor. E-4