Yamaha BD-S1065 Owners Manual - Page 45
Other, Messages Relating to BD disc and DVD disc, ADDITIONAL INFORMATION
UPC - 027108934044
View all Yamaha BD-S1065 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
■ Other Troubleshooting Problem The TV operates incorrectly. The Player heats up during use. Possible causes and solutions - Some TVs with wireless remote control capability may operate incorrectly when using the remote control of this Player. Use such TVs away from this Player. - When using this Player, the console cabinet may heat up depending on the usage environment. This is not a malfunction. ■ Messages Relating to BD disc and DVD disc - The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the operation is not correct. Error message Possible Error Possible Error Cannot play. - The disc cannot be played back with this Player. - Check the disc, and load it correctly. Incompatible disc. - If you load a disc which cannot be played with this Player (i.e. a scratched disc), or if you load 5 a disc upside down, this message will appear, and the disc tray will automatically pop out. - Occurs if the loaded disc cannot be played because it is a non-standard disc or scratched, etc. - Remove the disc. Cannot operate. - Occurs if an operation is incorrect. This USB memory is not formatted properly. Please format the memory in USB memory management. - Occurs if there is a formatting error. - Occurs if the USB memory is not formatted with FAT 32/16. - Format the USB memory again. - Format the USB memory with your PC. The Connected USB Memory cannot be used. It should be compliant with USB 2.0 - Occurs if USB memory not compliant with USB 2.0 High Speed (480Mbit/s) is used (i.e. USB 1.0/USB 1.1). - Connect USB 2.0 High Speed (480Mbit/s) compliant USB memory. ADDITIONAL INFORMATION To Reset this Player If this Player receives strong interference from a source such as excessive static electricity, strong external noise, malfunction of power supply, or voltage caused by lightning during use or a wrong operation is sent to the Player, errors like the Player not accepting an operation may occur. 1 Press and hold p on the Player until "RESET" appears on the front panel display when the Player does not operate properly even after the power has been turned off. 2 Turn on the power. Notes - When a reset is performed while the power is on, the Player will turn off. Turn the power on again. At this point, it may take a few moments for the system processing to finish before the Player is ready for use. - When the problem persists even after performing a reset, unplug the power cable and plug it in again. If this does not solve the problem, contact the nearest service center approved by Yamaha. Keylock function You can set the keylock to prevent accidental operations. Press and hold and on the front panel for more than 4 seconds while no disc is inserted in this Player and the disc tray is closed. - Each time you perform this operation, the function is activated or deactivated. - If you try to operate the Player while the keylock function is set, "Lock" blinks on the front panel display to indicate that the keylock function is set. English 41 En